Thermaltake Toughpower GF3 Snow TPD-1200AH3FLG 1200W Internal Power Supply
ATX 3.0 & PCIe Gen 5.0 Ready | Power Up the Next Generation Hardware Designed with a native PCIe 12+4pin modular connector, the Toughpower GF3 Snow series is built for next-gen PCIe 5.0 graphics cards and is compatible with Intel ATX 3.0 specifications. The GF3 Snow series delivers 80 PLUS Gold efficiency, it also offers stability, durability, and reliability. For users who crave for a pure white build, this power supply can definitely meet their demands. Fully Compatible with Intel ATX 3.0 Standards Toughpower GF3 Snow series is fully compatible with Intel ATX 3.0 Specifications which supports up to 200% power excursion, reaches 60% low load efficiency and complies with required power supply timing standards. PCIe Gen 5.0 Ready Toughpower GF3 Snow series comes with a 12+4pin connector to offer powerful and stable performance allowing the PSU to natively run next-generation GPUs. The wattage marked on the 12VHPWR's connector is the recommended wattage. (Ref. Intel design guideline) The native 12+4pin (12VHPWR) PCIe connector of the GF3 Snow 1200W can deliver up to 600W for PCIe 5.0 graphics cards. Made to Comply with the Latest Graphics Cards As the power consumption of graphics cards increase, so has their demand for power. The GF3 Snow series is designed to support NVIDIA and AMD graphics cards, it supports 8-pin PCIe cables for AMD graphics cards & entry RTX 40 series graphics cards, it also comes with a 1 x 12+4pin connector for RTX 40 series cards that need a PCIe Gen 5.0 connector, ready to supply the graphics cards according to their different ways of connections. Be Smart, Stay Quiet Features a 140mm fluid bearing fan to deliver excellent airflow. Furthermore, the Smart Zero Fan will the fan will not spin until the load exceeds 20% of the power supply, minimizing undesired noise. Extremely Strict Voltage Regulation ?±2% The voltage regulation is more strict than Intel's standard +5%,-7% for major rails and ±10% for -12V, is set to no more than ±2% for major rails, providing steady clean power through exceptional voltage stability. 17ms and and up Hold Up Time During a power interruption, your computer might shut down or reboot. We make sure that the GF3 Snow series will deliver at least 17ms at 100% workload, without system reboot or resetting. <30mV Low Ripple Noise Design Top-end build quality with low ripple noise. All ripples are lower than 30mV on +12V, +5V or +3.3V from 0% to 100% load to ensure a stable operation and keep your performance-critical components to function reliably for longer. More Stable than Ever 100% high quality Japanese 105°C/221°F electrolytic capacitors provides great durability as well as offering the highest stability, while remaining reliable. High Amperage Single +12V Rail & High-Class Technologies Powerful single +12V rail can properly deliver the power you need for the best compatibility. The use of LLC and DC to DC circuit design provides very stable operation and enhanced voltage regulation. Fully Modular Low-Profile Flat Cables Offers cable selection for users while powering the system at an advantageous voltage. Low-profile black cables make cable management easier, reduces clutter and increases airflow inside the chassis. |
Specification Compliance: | ATX 3.0 |
Efficiency: | 90% |
Power Factor Correction (PFC): | Active |
Number of Fans: | 1 |
Protection Type: | Over Current |
Protection Type: | Over Voltage |
Protection Type: | Under Voltage |
Protection Type: | Over Power |
Protection Type: | Short Circuit |
Protection Type: | Over Temperature |
Modular: | Yes |
NVIDIA SLI Supported: | Yes |
Number of +12V Rails: | 1 |
Input Voltage: | 120 V AC |
Input Voltage: | 230 V AC |
Output Voltage: | 3.3 V DC |
Output Voltage: | 5 V DC |
Output Voltage: | 12 V DC |
Output Voltage: | -12 V DC |
Output Voltage: | 5 V SB |
Output Voltage Detail: | 3.3 V DC @ 20 A |
Output Voltage Detail: | 5 V DC @ 20 A |
Output Voltage Detail: | -12 V DC @ 0.3 A |
Output Voltage Detail: | 5 V DC @ 3 A |
Output Voltage Detail: | 12 V DC @ 100 A |
Output Power: | 1200 W |
Input Frequency: | 50Hz/60Hz |
Minimum Operating Temperature: | 32°F (0°C) |
Maximum Operating Temperature: | 104°F (40°C) |
Form Factor: | Internal |
Height: | 3.4" |
Width: | 5.9" |
Depth: | 6.3" |
Energy Efficiency Certification: | 80 Plus Gold |
Environmentally Friendly: | Yes |
Limited Warranty: | 10 Year |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 841163090367
- Mfr's Part #: PS-TPD-1200FNFAGU-N