iConverter RS-422/485 Serial to Fiber Media Converter DB-9 LC Single-Mode 60km Module 87872
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
The Omnitron iConverter RS422/485 is a managed serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media. Fiber transmission extends serial signals up to 120km, and is immune from electrical and magnetic interference.
The RS422/485 is available with a single-mode, multimode or single-fiber transceiver. The serial port interface is available with either a DB-9 female connector or terminal block connector for field wiring.
The RS422/485 automatically detects the signal baud rate of connected Full-Duplex serial device, ranging from 110 to 921,600 baud. It also automatically adjusts to changes in the connected device's Full-Duplex baud rate during operation without reconfiguration or interruption of service.
Half-Duplex RS-485 and Full-Duplex RS-485 (sometimes referred to as Multipoint RS-422) operations are supported via a configurable baud rate DIP-switch to match the master/slave communication timing.
- Supports baud rates ranging from 110 to 921,600 baud
- Serial interface available as DB-9 or Terminal Block connector for field wiring
- Features built-in configurable terminators
- Features configurable baud rate for Half-Duplex RS-485 and Full-Duplex RS-485 operation
- Supports RTS and CTS controls
- Supports Point-to-Point Half and Full-Duplex, Multi- Point Full-Duplex, and either Head, Tail or Mid-Position
- Features remote Fiber Loopback DIP-switch for easy testing of fiber link, even during serial transmission
- Management is available with the addition of a management module to the chassis
- Modules are hot-swappable in 19-Module, 5-Module, 2-Module or 1-Module chassis
- Lifetime Warranty and free 24/7 Technical Support
|
Total Number of Ports: | 2 |
DVI: | No |
USB: | No |
Parallel Port: | No |
Digital Audio: | No |
Digital Audio/Video: | No |
Management Port: | No |
Number of LC Ports: | 1 |
LC Port Type: | Duplex |
Number of Serial Ports: | 1 |
Media Type Supported: | Optical Fiber |
Fiber Mode Supported: | Single-mode |
Fiber Optic Cable Wavelength: | 0.1 mil |
Maximum Distance Supported: | 60 km |
Form Factor: | Rack-mountable |
Form Factor: | Desktop |
Form Factor: | Internal |
Form Factor: | Wall Mountable |
Height: | 2.8" |
Width: | 0.9" |
Depth: | 4.5" |
Weight (Approximate): | 8 oz |
Package Contents: | - iConverter RS422/485 DB-9 LC Single-Mode 60km Plug-In Module
- User Manual
|
Additional Information: | Serial Port Type: |
Compatibility: | - iConverter 19-Module Chassis
- iConverter 5-Module Chassis
- iConverter 2-Module Chassis
- iConverter 1-Module Chassis
|
Certifications & Standards: | Compliance:
|
Environmentally Friendly: | Yes |
Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
Environmental Compliance: | Waste Electrical and Electronic Equipment Directive (WEEE) |
Country of Origin: | United States |
Limited Warranty: | Lifetime |
Shipping Restrictions
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
Special Order Item
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.
- UPC:
800975027350
- Mfr's Part #:
8787-2