Omnitron Systems iConverter 8786T-0 Transceiver/Media Converter 8786T0
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
- B-707755
- Media Converters
- Special Order
- Retail Packaging
- N/A
- New
- Omnitron Systems
Click to enlarge
(0 Ratings)
The iConverter RS422/485 is a managed serial RS-422 and RS-485 to fiber converter that transmits serial protocol over fiber media. The RS422/485 media converters operate inpairs, extending serial distances over fiber up to 120km, which improves noise immunity from electrical and magnetic interference. The RS422/485 is available with a single-mode dual fiber, multimode dual fiber or single-mode single-fiber transceiver. The serial port interface is available with either a DB-9 female connector or terminal block connector for field wiring. The RS422/485 automatically detects the data rate of connected Full-Duplex serial device, ranging from 110 bps to 921,600 bps. It also automatically adjusts to changes in the connected device's Full-Duplex data rate during operation without reconfiguration or interruption of service. Half-Duplex RS-485 and Full-Duplex RS-485 (sometimes referred to as Multipoint RS-422) operations are supportedvia a configurable baud rate DIP-switch to match the master/slave communication timing. Connection to DTE or DCE devices are configured by an easily accessible DIP-switch on the front-panel. This feature eliminates the need to use a specific serial cable for each type of device. A built-in remote Fiber Loopback DIP-switch provides easy validation of the entire fiber segment without interrupting fiber operations. Integrated configurable terminators support RS-422 and RS-485 operations, allowing the unit to be deployed at any node in the serial line. iConverter RS422/485 modules are hot-swappable and can be mounted in a 19-Module (2U high) or 5-Module (1U high) rack-mountable chassis (19-inch or 23-inch) with redundant AC, 24VDC or 48VDC power supplies. They can also be mounted in a 2-Module AC or 18 to 60VDC powered chassis, or in a 1-Module AC or DC powered chassis. The iConverter Multi-Service Platform consists of Network Interface Devices, T1/E1 multiplexers, CWDM multiplexers and managed media converters that combine to deliver Carrier Ethernet and TDM services over fiber or CWDM wavelengths. This flexible architecture supports a wide variety of configurations for scalable and reliable fiber connectivity in Service Provider and Enterprise networks. |
| Total Number of Ports: | 2 |
| Number of LC Ports: | 1 |
| LC Port Type: | Duplex |
| Media Type Supported: | Optical Fiber |
| Fiber Mode Supported: | Multi-mode |
| Fiber Optic Wavelength: | 1310 nm |
| Maximum Distance Supported: | 5 km |
| Fiber Optic Cable Core/Cladding Specification: | 62.5/125 µm |
| Fiber Optic Cable Core/Cladding Specification: | 50/125 µm |
| Power Source: | AC Adapter |
| Form Factor: | Rack-mountable |
| Height: | 2.8" |
| Width: | 0.9" |
| Depth: | 4.5" |
| Weight (Approximate): | 8 oz |
| Environmentally Friendly: | Yes |
| Country of Origin: | United States |
| Limited Warranty: | Lifetime |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
Special Order Item
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.
- UPC: 800975032491
- Mfr's Part #: 8786T-0
