Tripp Lite SmartPro 230V 2.7kW Line-Interactive Sine Wave UPS SMX3000XLRT2UA
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
(0 Ratings)
| 3kVA/3kW/208V Battery Backup for Distributed IT, Telecom or Enterprise Deployments The SMX3000XLRT2UA provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro® UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately). Outlets Protect Your Connected Components Eight C13 and two C19 outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Five outlets are grouped into two load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Optional LX Platform Network Management Card Allows Remote Access 24/7 The WEBCARDLXE network interface (sold separately) enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMX3000XLRT2UA maintains regulated 208V nominal output during brownouts and overvoltages from 160V to 294V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. |
| Plug/Connector Type: | IEC 60320 C20 |
| Receptacle Type: | IEC 60320 C13 |
| Receptacle Type: | IEC 60320 C19 |
| Receptacle Detail: | 8 x IEC 60320 C13 |
| Receptacle Detail: | 1 x IEC 60320 C19 |
| Protection Type: | Brownout |
| Protection Type: | Over Voltage |
| Protection Type: | Under Voltage |
| Protection Type: | EMI / RFI |
| Protection Type: | Black Out |
| Protection Type: | Surge |
| Emergency Power OFF: | Yes |
| Load Capacity (VA): | 3000 VA |
| Load Capacity (Watt): | 2700 W |
| Input Voltage: | 230 V AC |
| Input Current: | 14.10 A |
| Output Voltage: | 230 V AC |
| Waveform Type: | Sine Wave |
| Surge Energy Rating: | 350 J |
| Network Management: | SNMP Manageable |
| Alarm: | Power Failure |
| Alarm: | Low Battery |
| Alarm: | Overload |
| Alarm: | UPS Fault |
| Alarm: | Remote Shutdown |
| Alarm: | UPS StartUp |
| Status Indicators: | Front panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options |
| Serial Port: | Yes |
| USB: | Yes |
| Backup/Run Time (Full Load): | 3.90 Minute |
| Backup/Run Time (Half Load): | 11.10 Minute |
| Typical Battery Recharge Time: | 5 Hour |
| Hot Swappable: | Yes |
| Maximum Operating Temperature: | 104°F (40°C) |
| Thermal Dissipation: | 46.31 W |
| Height: | 3.5" |
| Width: | 17.5" |
| Depth: | 19.5" |
| Rack Height: | 2U |
| Form Factor: | Rack/Tower |
| Weight (Approximate): | 62.80 lb |
| Package Contents: |
|
| Certifications & Standards: |
|
| Software Included: | PowerAlert Monitoring Software |
| Country of Origin: | China |
| Environmentally Friendly: | Yes |
| Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
| Limited Warranty: | 2 Year |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 037332181381
- Mfr's Part #: SMX3000XLRT2UA
