Tripp Lite SmartPro 120V 3kVA 2.88kW Line-Interactive SineWave 2U Rack/Tower UPS
- Item #:
- Category:
- Availability:
- Packaging:
- Platform:
- Condition:
- Brand:
(0 Ratings)
| 3kVA/3kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments The SMART3000RMXLN provides reliable battery backup and AC power protection for connected devices against blackouts, brownouts, surges and line noise. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment. Pure sine wave power and unity power factor, even when on battery, means this SmartPro® UPS can be used with sensitive IT equipment, including servers, VoIP phones, data storage and PoE switches. Even if the battery is depleted, the UPS will automatically restart when the power comes back on after an extended outage. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately). NEMA Outlets Protect Your Connected Components One L5-30R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating. Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7 The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The two-line front-panel LCD monitoring screen features 10 selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations. Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART3000RMXLN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure. Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better This UPS filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer. More from the Manufacturer |
| AVR: | Yes |
| Plug/Connector Type: | NEMA L5-30P |
| Receptacle Type: | NEMA 5-15/20R |
| Receptacle Type: | NEMA L5-30R |
| Receptacle Detail: | 8 x NEMA 5-15/20R |
| Receptacle Detail: | 1 x NEMA L5-30R |
| Emergency Power OFF: | Yes |
| Transfer Time: | 5 ms |
| EMI/RFI Noise Filter: | Yes |
| Phase: | Single Phase |
| Load Capacity (VA): | 3000 VA |
| Load Capacity (Watt): | 2880 W |
| Input Voltage: | 120 V AC |
| Output Voltage: | 110 V AC |
| Output Voltage: | 115 V AC |
| Output Voltage: | 120 V AC |
| Input Frequency: | 60 Hz |
| Output Frequency: | 60 Hz |
| Waveform Type: | Pure Sine Wave |
| Surge Energy Rating: | 570 J |
| Network Management: | SNMP Manageable |
| Alarm: | UPS StartUp |
| Alarm: | Power Failure |
| Alarm: | Low Battery |
| Alarm: | Overload |
| Alarm: | UPS Fault |
| Alarm: | Remote Shutdown |
| Status Indicators: | Network Link/Activity (Green): Flashes for network activity. Network Speed (Yellow): 10 Mbps (Flashing), 100 Mbps (On steady). LX Platform Interface Status: Normal Operation (Solid Green); Software Update (Alternating Green/Orange ~1/sec); Factory Reset (Alternating Green/Orange ~2/sec). |
| Serial Port: | Yes |
| USB: | Yes |
| DC System Voltage: | 48 V DC |
| Backup/Run Time (Full Load): | 3 Minute |
| Backup/Run Time (Half Load): | 10 Minute |
| Typical Battery Recharge Time: | 5 Hour |
| Hot Swappable: | Yes |
| Replaceable Battery: | Yes |
| Maximum Operating Temperature: | 104°F (40°C) |
| Storage Temperature: | 5°F (-15°C) - 122°F (50°C) |
| Height: | 3.5" |
| Width: | 17.5" |
| Depth: | 19" |
| Rack Height: | 2U |
| Form Factor: | Rack/Tower |
| Weight (Approximate): | 72.80 lb |
| Package Contents: | |
| Certifications & Standards: |
|
| Software Included: | PowerAlert Software |
| Country of Origin: | China |
| Environmentally Friendly: | Yes |
| Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
| Limited Warranty: | 2 Year |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
- UPC: 037332177896
- Mfr's Part #: SMART3000RMXLN
