Perle PSI-MOS-RS232/FO 850 T Transceiver/Media Converter 27084234
For applications where redundancy is required, the PSI-MOS-RS232/FO 850 T Serial to Fiber Converter transparently connects RS232 devices to two fiber optic cables. By transmitting RS232 data over optical fiber, these serial media converters provide an economical path to extend the reach of serial devices. The serial data input is transmitted out both fiber ports to different locations or back-up systems. Expandable Serial to Fiber Network infrastructuresUp to ten (10) Serial to Fiber Converters can be grouped together using the TBUS DIN Rail bus system for voltage and data. This allows the serial converter to operate in additional network topology environments:
RS232 Serial transmission is limited to 20 Kbps for a distance of only 15 meters (50 feet). With the FO 850 T Serial to Fiber Converter serial data transmission can be extended up to 4.2km (2.6 miles). Therefore, any two pieces of asynchronous serial equipment, located miles apart, can communicate at half or full duplex over fiber optic cable at rates up to 115.2 kbps. EMI, RFI and Transient Surge ImmunityThe FO 850 T fiber optic transmission system electrically isolates connected devices. Electromagnetic interference (EMI) is a common phenomenon in industrial environments. This interference can cause corruption of data over serial or copper-based Ethernet links. However, data transmitted over fiber optic cable is completely immune to this type of noise. This prevents the negative effects of voltage equalization currents and electromagnetic interference on the data cables. A Serial to Fiber Media Converter therefore enables you to inter-connect your serial devices over fiber ensuring optimal data transmission, increased availability of the system, and improved network design flexibility for point-to-point connections, linear networks and star topology networks. Flexible Fiber Optic ConnectionsThe FO 850 T operates at 850 nm wavelength, using a separate LED emitter and photo-detector on both ST type connectors. Almost any multimode glass fiber size can be used including 50/125 m, 62.5/125 m, and 200/230 m. Power Budget ConsiderationsCalculating the power budget is critically important when planning the fiber optic link. The optical power budget is the amount of light required to transmit data successfully through a fiber-optic connection. The amount of light energy available within the setup will dictate the length of the fiber optic cable run between serial media converters within the network. Optical power budgets are critical to help businesses avoid signal distortion. To learn how to calculate optical power budget read our technical note. Transmit and receive dBm can be found in the Hardware specifications. |
Total Number of Ports: | 3 |
Network (RJ-45): | No |
DVI: | No |
USB: | No |
Management Port: | No |
Number of ST Ports: | 2 |
ST Port Type: | Duplex |
Media Type Supported: | Optical Fiber |
Fiber Mode Supported: | Multi-mode |
Fiber Optic Wavelength: | 850 nm |
Maximum Distance Supported: | 4.20 km |
Fiber Optic Cable Core/Cladding Specification: | 50/125 µm |
Fiber Optic Cable Core/Cladding Specification: | 62.5/125 µm |
Power Source: | Power Supply |
Form Factor: | Rail-mountable |
Height: | 3.9" |
Width: | 1.4" |
Depth: | 4.1" |
Weight (Approximate): | 7.39 oz |
Package Contents: |
|
Environmentally Friendly: | Yes |
Environmental Compliance: | China Restriction of Hazardous Substances (China RoHS) |
Environmental Compliance: | Restriction of Hazardous Substances (RoHS) |
Environmental Compliance: | Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) |
Country of Origin: | Germany |
Limited Warranty: | 1 Year |
- This item cannot be shipped to PO Boxes.
- This item can be shipped only within the U.S.
Special Order Item
This item ships directly from the manufacturer and is not stocked in our warehouse. If stock is available at the manufacturer, the item will ship directly to you, usually within 7 - 15 business days.
Once the order has been sent to the manufacturer it can no longer be canceled.
If payment is made via credit card it will be charged before the order is sent to the manufacturer.
You must contact the manufacturer directly regarding returns and defective items.
We will contact you by email if the item is sold out or backordered (and we were unable to update the site before you placed the order) or if the item will be delayed longer than expected.
We have no control over the speed of the manufacturer's order processing, or whether they will honor your request to ship the item by any particular method.
- UPC: 679202032913
- Mfr's Part #: 27084234